WARNING:

1. Because this inverter is non isolated, only three types of PV modules are acceptable: single

crystalline, poly crystalline with class A rated and CIGS modules.

To avoid any malfunction, do not connect any PV modules with possible current leakage to the inverter. For

example, grounded PV modules will cause current leakage to the inverter. When using CIGS modules, please

be sure NO grounding.

2.Before connecting to AC in put power source , please install a separate AC breaker between

inverter and AC input power source . This will ensure the inverter can be securely disconnected during

maintenance and fully protected from over current of AC input. The recommended spec of AC b reaker is 16A

for 1.5KW and 32A for 3KW and 5 0A for 5KW

There are two terminal blocks with “IN” and “OUT” markings. Please do NOT mis connect input

and output connectors.

Main Features

Pure sine wave max 5000w output

Max 80A MPPT solar charger (max 5kw PV array)

Max 450Vdc input

HYBRID Grid-Tie / Off Grid SOLAR inverter for 48V system

Parallel support up to 9 units

Batteryless operation

Total system max charging: 80A

Bundled monitoring & setting software

Supports 50hz or 60hz (program adjustable)

Grid feedback when there is excess energy

USB interface available

Able to use ac grid or generator power

Timer setting for AC charging & output now available

MODEL	IGrid SV II 5KW
Max. PV Array Power	5000W
Rated Output Power	5000W
Maximum PV Array Open Circuit Voltage	450 VDC
MPPT Range @ Operating Voltage	120 VDC ~ 430 VDC
MPP Tracker Number	1
GRID-TIE OPERATION
GRID OUTPUT (AC)
Nominal Output Voltage	220/230/240 VAC
Output Voltage Range	184 - 264.5 VAC or 195.5 - 253 VAC (Selectable)
Nominal Output Current	21.7A
Power Factor	> 0.99
EFFICIENCY
Maximum Conversion Efficiency (DC/AC)	95%
OFF-GRID, HYBRID OPERATION
GRID INPUT
Acceptable Input Voltage Range	90 - 280 VAC or 170 - 280 VAC
Frequency Range	50 Hz/60 Hz (Auto sensing)
Maximum AC Input Current	40A
BATTERY MODE OUTPUT (AC)
Nominal Output Voltage	220/230/240 VAC
Output Waveform	Pure sine wave
Efficiency (DC to AC)	93%
BATTERY & CHARGER
Nominal DC Voltage	48 VDC
Maximum Solar Charge Current	80 A
Maximum AC Charge Current	80 A
Maximum Charge Current	80 A
GENERAL
PHYSICAL
Dimension, D x W x H (mm)	120 x 295 x 468
Net Weight (kgs)	12
INTERFACE
Parallel Function	Yes, 9 units (Parallel kits are not included)
Communication Ports	USB, RS-232 and dry contact
ENVIRONMENT
Humidity	0 ~ 90% RH (Non-condensing)
Operating Temperature	0 to 50°C